Dell N3200-ON Networking N-Series Switches User Guide version 6.8.0 - Page 345

console(config)#interface range Gi1/0/1-23 console(config-if)#authentication host-mode single-host 9 Set the ports to access mode (default VLAN 1). Enable the policy on the ports. console(config-if)#switchport mode access console(config-if)#service-policy in con-pol console(config-if)#exit console(config)#exit Captive Portal This section describes how to configure the Captive Portal feature. The topics covered in this section include: • Captive Portal Overview • Default Captive Portal Behavior and Settings • Configuring Captive Portal (Web) • Configuring Captive Portal (CLI) • IEEE 802.1X Configuration Examples Captive Portal Overview A Captive Portal (CP) helps manage or restrict network access. CPs are often used in locations that provide wired Internet access to customers, such as business centers and hotels. For example, a hotel might provide an Ethernet port in each room so that guests can connect to the Internet during their stay. The hotel might charge for Internet use, or the hotel might allow guests to connect only after they indicate that they have read and agree to the acceptable use policy. What Does Captive Portal Do? The CP feature allows you to require a user to enter login information on a custom web page before gaining access to the network. When the user connects to the port and opens a browser, the user is presented with a welcome screen. To gain network access, the user must enter a username (for guest access) or a username and password (for authenticated access) and Authentication, Authorization, and Accounting 345