Dell N3200-ON Networking N-Series Switches User Guide version 6.8.0 - Page 663

Command Purpose switchport port-security [aging Enable port security on the port. This prevents time minutes|mac-address {sticky the switch from learning new addresses on this |[sticky] mac-address vlan {vlan- port after the maximum number of addresses id}}] |dynamic value|maximum has been learned. value] |violation {protect |shutdown}] • aging time - Configure the secure MAC aging on the interface. • mac-address - Configure a static MAC address on the interface and VLAN. This command performs the same function as the mac address-table static command. Use the optional sticky keyword to configure a sticky MAC address. • dynamic - Set the maximum number of dynamic MAC addresses that may be learned on the interface. • maximum - Set the maximum number of static MAC addresses that may be configured on the interface. This limit applies regardless of the port security administrative setting. • sticky - Convert dynamic addresses learned on the interface to sticky • violation - Configure the interface behavior on a port security violation CTRL + Z Exit to Privileged Exec mode. show port-security [interface-id | all | dynamic interface-id | static interface-id | violation interfaceid] View port security settings on all interfaces or the specified interface. Use the dynamic keyword to display learned MAC addresses and the static keyword to display configured MAC addresses. Port and System Security 663