Dell N3200-ON Networking N-Series Switches User Guide version 6.8.0 - Page 684

Policy Action (VLAN) ACL Action (Interface) Result set ip precedence deny deny mirror both redirect both (see Note 1) rate limit both set interface null0 deny deny (see Note 2) mirror mirror redirect redirect rate limit deny set ip next-hop (default) deny deny mirror both redirect both (see Note 1) rate limit both 1. In the case of redirect ACL action, both the redirect and policy actions are honored, if possible. This implies the policy routed packet is redirected to the configured physical port and the redirected port is participating in the egress VLAN to which the packet is being routed. In other words, the system will select the interface specified by the ACL which is a member of the egress VLAN. If the physical interface is not a member of the egress VLAN, the behavior is undefined. 2. In case of the PBR set interface Null0 action, the PBR routed packet is dropped only if no conflicting port ACL is configured. Configuring ACL deny statements that also match packets with a PBR set interface Null0 action is redundant and wastes system resources. Limitations Internally Generated Packets Packets that are generated internally by the router are never policy routed. Set Clause Required Route-map deny/permit statements without "set" clauses are ignored except in the case where a deny route-map refers to an ACL with a permit statement. 684 Access Control Lists