Dell N3200-ON Networking N-Series Switches User Guide version 6.8.0 - Page 455

Command Purpose clock summer-time Use this command if the summer time does not start and date {date month | end every year according to a recurring pattern. Enter the month date} year month and then the date, or the date and then the month. hh:mm {date month | • date- Day of the month. (Range: 1-31.) month date} year hh:mm [offset offset] • month - Month. (Range: The first three letters by name) [zone acronym] • hh:mm - Time in 24-hour format in hours and minutes. (Range: hh: 0-23, mm: 0-59) • offset - Number of minutes to add during the summertime. (Range:1-1440) • acronym - The acronym for the time zone to be displayed when summertime is in effect. (Range: Up to four characters) CTRL + Z Exit to Privileged Exec mode. show clock [detail] View information about the time. Include the detail keyword to view information about the time zone and summer time. Viewing Slot Information Use the following commands to view information about Slot 0 and its support. Command Purpose show slot Display status information about the expansion slots. show supported cardtype Display information about the modules the switch supports. Configuring PoE Settings This section applies to (Dell Networking N1108P-ON/ N1124P-ON/ N1148PON, N1524P/N1548P, N2024P/N2048P/N2128PX-ON, N2224PXON/N2248PX-ON, N3024EP-ON/N3132PX-ON Only) Use the following commands to configure PoE information. Managing General System Settings 455