Dell N3200-ON Networking N-Series Switches User Guide version 6.8.0 - Page 332

Configuring Internal Authentication Server Users Use the following commands to add users to the IAS database and to use the database for 802.1X authentication. Command configure aaa ias-user username user password password [encrypted] CTRL + Z show aaa ias-users clear aaa ias-users Purpose Enter Global Configuration mode. Add a user to the IAS user database. This command also changes the mode to the IAS User Config mode. Configure the password associated with the user. Exit to Privileged Exec mode. View all configured IAS users. Delete all IAS users from the database. IEEE 802.1X Configuration Examples This section contains the following examples: • Configuring 802.1X Authentication • Controlling Authentication-Based VLAN Assignment • Allowing Dynamic Creation of RADIUS-Assigned VLANs • Configuring Authentication Server Dynamic ACL or DiffServ Policy Assignments Configuring 802.1X Authentication The network in this example requires clients to use 802.1X authentication to access the network through the switch ports. The administrator must configure the following settings on systems other than the switch before configuring the switch: 1 Add the users to the client database on the Authentication Server, such as a RADIUS server with Cisco® Secure Access Control Server (ACS) software. 2 Configure the settings on the client, such a PC running Microsoft® Windows, to require 802.1X authentication. 332 Authentication, Authorization, and Accounting