Dell OptiPlex 3240 All-in-One Owners Manual - Page 10
Installing the stand, Removing the cable cover, After Working Inside Your Computer, stand
View all Dell OptiPlex 3240 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing the stand 1. Align the stand and slide it on the back of the computer. 2. Press the cover attached to the stand, until it snaps in. 3. Follow the procedure in After Working Inside Your Computer. Removing the cable cover 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the stand. 3. To remove the cable cover: a. Remove the screw that secures the cable cover [1]. b. Push the release tabs to release the cable cover [2]. c. Lift the cable cover and remove it away from the computer [3]. 10
Installing the stand
1.
Align the stand and slide it on the back of the computer.
2.
Press the cover attached to the stand, until it snaps in.
3.
Follow the procedure in
After Working Inside Your Computer
.
Removing the cable cover
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
stand
.
3.
To remove the cable cover:
a.
Remove the screw that secures the cable cover [1].
b.
Push the release tabs to release the cable cover [2].
c.
Lift the cable cover and remove it away from the computer [3].
10