Dell OptiPlex 3240 All-in-One Owners Manual - Page 32
To remove the system board, Remove the screws that secure the system board to the chassis [1].
View all Dell OptiPlex 3240 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
6. To release the final set of cables from the system board: a. Press the latches on either side of the connector and pull the LVDS cable to disconnect it from the system board [1, 2]. b. Lift the latch and disconnect the cable from the connector [3, 4]. 7. To remove the system board: a. Remove the screws that secure the system board to the chassis [1]. b. Slide the system board and lift it away from the chassis [2]. 32
6.
To release the final set of cables from the system board:
a.
Press the latches on either side of the connector and pull the LVDS cable to disconnect it from
the system board [1, 2].
b.
Lift the latch and disconnect the cable from the connector [3, 4].
7.
To remove the system board:
a.
Remove the screws that secure the system board to the chassis [1].
b.
Slide the system board and lift it away from the chassis [2].
32