Dell OptiPlex 3240 All-in-One Owners Manual - Page 31
Disconnect the touch pad cable from the connectors on the system board [2].
View all Dell OptiPlex 3240 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
m. processor fan 3. To release the initial set of cables from the system board: a. Disconnect the optical-drive cable and hard-drive cable from the connectors on the system board [1]. b. Disconnect the touch pad cable from the connectors on the system board [2]. c. Unthread the cables from the retention clips of the computer [3]. 4. To release the second set of cables from the system board: a. Remove the screws that secure the optical-drive cable and hard-drive cable to the system [1]. b. Disconnect the optical-drive cable and hard-drive cable [2]. 5. Disconnect all the cables that are connected to the system board. 31
m.
processor fan
3.
To release the initial set of cables from the system board:
a.
Disconnect the optical-drive cable and hard-drive cable from the connectors on the system
board [1].
b.
Disconnect the touch pad cable from the connectors on the system board [2].
c.
Unthread the cables from the retention clips of the computer [3].
4.
To release the second set of cables from the system board:
a.
Remove the screws that secure the optical-drive cable and hard-drive cable to the system [1].
b.
Disconnect the optical-drive cable and hard-drive cable [2].
5.
Disconnect all the cables that are connected to the system board.
31