Dell OptiPlex 3240 All-in-One Owners Manual - Page 16
Installing the optical-drive assembly, Removing the system-board shield
 |
View all Dell OptiPlex 3240 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installing the optical-drive assembly 1. Tighten the screws to secure the bracket to the optical drive. 2. Insert the optical-drive assembly into the drive slot, until it snaps in. 3. Install the: a. back cover b. stand 4. Follow the procedure in After Working Inside Your Computer. Removing the system-board shield 1. Follow the procedure in Before Working Inside Your Computer. 2. Remove the: a. stand b. back cover 3. To remove the system board shield: a. Press the securing tab to release the system-board shield from the slots on the computer [1]. b. Slide the system-board shield away from the computer [2]. c. Lift the system-board shield from the computer [3]. 16
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
 |
 |
Installing the optical-drive assembly
1.
Tighten the screws to secure the bracket to the optical drive.
2.
Insert the optical-drive assembly into the drive slot, until it snaps in.
3.
Install the:
a.
back cover
b.
stand
4.
Follow the procedure in
After Working Inside Your Computer
.
Removing the system-board shield
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the:
a.
stand
b.
back cover
3.
To remove the system board shield:
a.
Press the securing tab to release the system-board shield from the slots on the computer [1].
b.
Slide the system-board shield away from the computer [2].
c.
Lift the system-board shield from the computer [3].
16