Dell OptiPlex 3240 All-in-One Owners Manual - Page 44
Deep Sleep, Control, Wake on LAN, Fan Control, Override, USB Wake, Support, Block Sleep
View all Dell OptiPlex 3240 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Option Deep Sleep Control Description Default setting: Disabled NOTE: This feature does not work if you turn off your computer using the switch on a power strip or surge protector or if Auto Power is set to disabled. Allows you to define the controls when Deep Sleep is enabled. • Disabled • Enabled in S5 only • Enabled in S4 and S5 - This option is enabled by default. NOTE: This option must be disabled for Wake on LAN feature to work. Fan Control Override Controls the speed of the system fan. This option is disabled by default. NOTE: When enabled, the fan runs at full speed. USB Wake Support Allows you to enable USB devices to wake the system from Standby. NOTE: This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the system setup removes power from all the USB ports to conserve battery power. • Enable USB Wake Support Default setting: The option is disabled. Wake on LAN/ WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a LAN signal. • Disabled • LAN Only • WLAN Only • LAN or WLAN • LAN with PXE Boot Default setting: Disabled Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment. Block Sleep (S3 state) Default setting: This option is disabled Intel Ready Mode This option enables the capability of Intel Ready Mode technology. 44