Dell OptiPlex 3240 All-in-One Owners Manual - Page 21
Installing the converter board, Tighten the screws to secure the converter board to the chassis.
View all Dell OptiPlex 3240 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4. To remove the converter board: a. Remove the screws that secure the converter board to the chassis [1]. b. Lift the converter board away from the chassis [2]. Installing the converter board 1. Place the convertor board in its slot. 2. Tighten the screws to secure the converter board to the chassis. 3. Connect the converter-board cable and display-backlight cable to the connectors on the converter board. 4. Install the: a. VESA mount bracket b. system board shield c. speaker cover d. cable cover e. back cover f. stand 5. Follow the procedure in After Working Inside Your Computer. 21
4.
To remove the converter board:
a.
Remove the screws that secure the converter board to the chassis [1].
b.
Lift the converter board away from the chassis [2].
Installing the converter board
1.
Place the convertor board in its slot.
2.
Tighten the screws to secure the converter board to the chassis.
3.
Connect the converter-board cable and display-backlight cable to the connectors on the converter
board.
4.
Install the:
a.
VESA mount bracket
b.
system board shield
c.
speaker cover
d.
cable cover
e.
back cover
f.
stand
5.
Follow the procedure in
After Working Inside Your Computer
.
21