Dell OptiPlex 7090 Tower Service Manual - Page 21
Installing the primary 2.5-inch hard-drive assembly
![]() |
View all Dell OptiPlex 7090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Steps 1. Insert the hard-disk drive assembly into the slot on the computer until it clicks into place. 2. For 2.5-inch hard-disk drive set as secondary, connect the black hard drive data cable and power cable to the connectors on the 2.5-inch hard drive. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Installing the primary 2.5-inch hard-drive assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the 2.5-inch hard-drive assembly and provides a visual representation of the installation procedure. Removing and installing components 21
![](/manual_guide/products/dell-optiplex-7090-tower-service-manual-727a9f8/21.png)
Steps
1.
Insert the hard-disk drive assembly into the slot on the computer until it clicks into place.
2.
For 2.5-inch hard-disk drive set as secondary, connect the black hard drive data cable and power cable to the connectors on
the 2.5-inch hard drive.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
Installing the primary 2.5-inch hard-drive assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the 2.5-inch hard-drive assembly and provides a visual representation of the
installation procedure.
Removing and installing components
21