Dell OptiPlex 7090 Tower Service Manual - Page 26
Removing and installing components, cables to the hard-disk drive.
View all Dell OptiPlex 7090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Steps 1. Slide and insert the 3.5-inch hard-disk drive assembly into the hard-disk drive slot. 2. Replace the EMI shield on the chassis. 3. Align the hard-disk drive assembly with the tabs on the chassis. 4. Route the power cable and the data cable through the routing guides on the hard-disk drive assembly and connect the cables to the hard-disk drive. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. 26 Removing and installing components
Steps
1.
Slide and insert the 3.5-inch hard-disk drive assembly into the hard-disk drive slot.
2.
Replace the EMI shield on the chassis.
3.
Align the hard-disk drive assembly with the tabs on the chassis.
4.
Route the power cable and the data cable through the routing guides on the hard-disk drive assembly and connect the
cables to the hard-disk drive.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
26
Removing and installing components