Dell OptiPlex 7090 Tower Service Manual - Page 35
Installing the processor fan and 125 W heat-sink assembly, Steps, Next steps, Prerequisites
View all Dell OptiPlex 7090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Steps 1. Align and place the heat-sink metal plate above the processor fan and replace the two screws to secure the metal plate to the processor fan. 2. Insert the processor fan into its slot in the heat-sink. 3. Replace the six screws to secure the processor fan to the heat-sink assembly. Next steps 1. Install the processor fan and heat-sink assembly. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Installing the processor fan and 125 W heat-sink assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. NOTE: If either the processor or the heat sink is replaced, use the thermal grease that is provided in the kit to ensure that thermal conductivity is achieved. Removing and installing components 35