Dell OptiPlex 7090 Tower Service Manual - Page 45
Lift the pull tab to close the PCIe door., is firmly seated.
![]() |
View all Dell OptiPlex 7090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Steps 1. Align the powered GPU with the PCI-Express card connector on the system board. 2. Using the alignment post, connect the powered GPU in the connector and press down firmly. Ensure that the powered GPU is firmly seated. 3. Lift the pull tab to close the PCIe door. Removing and installing components 45
![](/manual_guide/products/dell-optiplex-7090-tower-service-manual-727a9f8/45.png)
Steps
1.
Align the powered GPU with the PCI-Express card connector on the system board.
2.
Using the alignment post, connect the powered GPU in the connector and press down firmly. Ensure that the powered GPU
is firmly seated.
3.
Lift the pull tab to close the PCIe door.
Removing and installing components
45