Dell OptiPlex 7090 Tower Service Manual - Page 55
Voltage regulator heat sink, Removing the VR heat sink
![]() |
View all Dell OptiPlex 7090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Steps 1. Insert the rubber grommets on the chassis. 2. Align the slots on the fan with the rubber grommets on the chassis. 3. Route the rubber grommets through the slots on the fan and pull the rubber grommets until the fan snaps into position. 4. Connect the fan cable to the connector on the system board. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Voltage regulator heat sink Removing the VR heat sink Prerequisites 1. Follow the procedure in before working inside your computer. Removing and installing components 55
![](/manual_guide/products/dell-optiplex-7090-tower-service-manual-727a9f8/55.png)
Steps
1.
Insert the rubber grommets on the chassis.
2.
Align the slots on the fan with the rubber grommets on the chassis.
3.
Route the rubber grommets through the slots on the fan and pull the rubber grommets until the fan snaps into position.
4.
Connect the fan cable to the connector on the system board.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
Voltage regulator heat sink
Removing the VR heat sink
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
Removing and installing components
55