Dell OptiPlex 7090 Tower Service Manual - Page 82
Replace the eight screws #6-32 that secure the system board to the chassis.
View all Dell OptiPlex 7090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Steps 1. Slide the front I/O-ports on the system board into the front I/O-slots on the chassis and align the screw holes on the system board with the screw holes on the chassis. 2. Replace the (M2x4) screw to secure the system board to the chassis. 3. Replace the eight screws (#6-32) that secure the system board to the chassis. 82 Removing and installing components
Steps
1.
Slide the front I/O-ports on the system board into the front I/O-slots on the chassis and align the screw holes on the
system board with the screw holes on the chassis.
2.
Replace the (M2x4) screw to secure the system board to the chassis.
3.
Replace the eight screws (#6-32) that secure the system board to the chassis.
82
Removing and installing components