Dell OptiPlex 7090 Tower Service Manual - Page 57
Speaker, Removing the speaker
![]() |
View all Dell OptiPlex 7090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Steps 1. Remove the liner behind the VR heatsink module. 2. Align and adhere the VR heatsink on the system board. 3. Tighten the two captive screws that secure the VR heatsink to the system board. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Speaker Removing the speaker Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. About this task The following images indicate the location of the speaker and provide a visual representation of the removal procedure. Removing and installing components 57
![](/manual_guide/products/dell-optiplex-7090-tower-service-manual-727a9f8/57.png)
Steps
1.
Remove the liner behind the VR heatsink module.
2.
Align and adhere the VR heatsink on the system board.
3.
Tighten the two captive screws that secure the VR heatsink to the system board.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
Speaker
Removing the speaker
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
Removing and installing components
57