Dell PowerConnect W-Airwave W-Airwave 7.1 User Guide - Page 113
Con packet identification rules, Groups >, PTMP/Wimax, Groups > PTMP/WiMAX
View all Dell PowerConnect W-Airwave manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Table 71 Groups > PTMP/WiMAX Fields and Default Values Setting Default Description 802.11g Radio Channel Channel Bandwidth Network Name Network Secret 10 20 Wireless Network None Selects the channel used for 802.11g radios by the devices in this group. Defines the channel bandwidth used by the devices in this group. Sets the Network name, with a range of length supported from two to 32 alphanumeric characters. Sets a shared password to authenticate clients to the network. 4. To configure packet identification rules, click the Configure packet identification rules link on the Groups > PTMP/Wimax configuration page and define the settings as required. Packet identification rules are used to define which packets match a subscriber station class. Figure 62 illustrates this page and Table 72 describes the settings and default values. Figure 62 Groups > PTMP/WiMAX Configuring Packet Identification Rules Page Illustration Table 72 PTMP/WiMAX Configuring Packet Identification Rules Fields and Default Values Setting Default Description Name Use IP TOS Minimum TOS Value (positive integer) Maximum TOS Value (positive integer) None No 0 0 Text field defines a name for the PIR. The name should be meaningful and descriptive. The name is used to define the subscriber station class. Identifies packets based on IP Type-of-Service for the PIR. Specifies the minimum TOS used to identify packets. Specifies the maximum TOS used to identify packets Dell PowerConnect W AirWave 7.1 | User Guide Configuring and Using Device Groups in AWMS | 113