Dell PowerConnect W-Airwave W-Airwave 7.1 User Guide - Page 20
Step 5: Naming the AWMS Network Administration System, Step 6: Assigning a Host Name to the AWMS
View all Dell PowerConnect W-Airwave manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
STEP 4: Assigning AWMS's address AWMS must be configured with a static IP. Primary Network Interface Configuration 1) IP Address : xxx.xxx.xxx.xxx 2) Netmask : xxx.xxx.xxx.xxx 3) Gateway : xxx.xxx.xxx.xxx 4) Primary DNS : xxx.xxx.xxx.xxx 5) Secondary DNS: xxx.xxx.xxx.xxx 9) Commit Changes 0) Exit (discard changes) If you want to configure a second network interface, please use AWMS's web interface, AWMS Setup --> Network Tab 1. Enter the network information. Note: The Secondary DNS setting is an optional field. 2. Commit the changes by typing 9 and pressing Enter. To discard the changes, type 0 and press Enter. Step 5: Naming the AWMS Network Administration System Upon completion of the previous step, the following message appears. STEP 5: Naming AWMS AWMS name is currently set to: New AWMS Please enter a name for your AWMS: 1. At the prompt, enter a name for your AWMS server and press Enter. Step 6: Assigning a Host Name to the AWMS Upon completion of the previous step, the following message appears on the screen. STEP 6: Assigning AWMS's hostname Does AWMS have a valid DNS name on your network (y/n)? 1. If AWMS does not have a valid host name on the network, enter `n` at the prompt. The following message appears: Generating SSL certificate for < IP Address > 2. If AWMS does have a valid host name on the network, enter `y` at the prompt. The following message appears: Enter AWMS's DNS name: 3. Type the AWMS DNS name and press Enter. The following message appears: Generating SSL certificate for < IP Address > Proceed to the next step as the system prompts you. 20 | Installing AWMS Dell PowerConnect W AirWave 7.1 | User Guide