Dell PowerEdge 1300 Dell PowerEdge Systems Microprocessor Upgrade Guide
Dell PowerEdge 1300 Manual
View all Dell PowerEdge 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerEdge 1300 manual content summary:
- Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 1
- Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 2
Throughout this guide, blocks of text may be accompanied by an icon and printed in strictly forbidden. Trademarks used in this text: Dell, the DELL E COM logo, and PowerEdge are trademarks of Dell Computer Corporation; Intel and Pentium are registered trademarks of Intel Corporation. Other - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 3
Updating the BIOS 1-4 Saving RCU Configuration Settings 1-4 Installing Upgrade Microprocessors in the PowerEdge 1300 1-4 Installing Upgrade Microprocessors in the PowerEdge 2300 1-6 Installing Upgrade Microprocessors in the PowerEdge 4300 1-8 Installing Upgrade Microprocessors in the PowerEdge - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 4
procedures for upgrading the Intel® Pentium® II or III microprocessors with either Intel Pentium II or Pentium III microprocessors in the following Dell PowerEdge systems: PowerEdge 1300 PowerEdge 2300 PowerEdge 4300 PowerEdge 4350 Installing one or more microprocessors in your server may involve - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 5
frequency and cache size as the primary microprocessor. For example, if the system you are installing has a 500-megahertz (MHz) Pentium III primary microprocessor, the secondary microprocessor must also be a 500-MHz Pentium III microprocessor. 1-2 Dell PowerEdge Systems - Microprocessor Upgrade - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 6
the instructions on the screen. 4. After the Successfully Completed Done message appears on the screen, remove the ESM firmware diskette from the diskette drive and follow the instructions on the screen to reboot the system. support.dell.com Dell PowerEdge Systems - Microprocessor Upgrade 1-3 - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 7
http://support.dell.com. To upgrade to Pentium II or Pentium III microprocessors in the PowerEdge 1300, perform the following steps: 1. Access the system board, which involves the following steps: a. Disconnecting power and peripheral cables. b. Removing the covers. c. Rotating the power supply. See - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 8
peripherals to their power sources and turn them on. As the system boots, it detects the presence of the new microprocessor and automatically changes the system configuration information in the System Setup program. NOTE: After you remove and replace the cover of a PowerEdge 1300 system, the chassis - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 9
correctly. See your User's Guide and your computer Installation and Troubleshooting Guide for additional information on running the Dell Diagnostics and troubleshooting any problems that may occur. To upgrade to Pentium II or Pentium III microprocessors in the PowerEdge 2300, perform the following - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 10
system board. f. At the left side of the system, locate and remove the three screws that secure the system board and mounting plate to the chassis (see Figure 1-1). mounting screws (3) system board and mounting-plate assembly support.dell.com Dell PowerEdge Systems - Microprocessor Upgrade 1-7 - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 11
surface. i. Remove the mounting upgrade to Pentium II or Pentium III microprocessors in the PowerEdge upgrade kit. If you are upgrading a PowerEdge 4300 with a microprocessor with an operating frequency less than 600 MHz, you do not need to replace the system board mounting tray. 1-8 Dell PowerEdge - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 12
and remove the computer cover. For instructions, see the Installation and Troubleshooting Guide. b. To access the system board, release the system-board tray latch at the back lower corner of the tray (see Figure 1-2) and pull the tray open to the first stop position (or service position). NOTE - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 13
Install the upgrade microprocessor. See "Installing the Upgrade Microprocessor", found later in this document. 6. Reassemble and check the system. See "Reassembling and Checking the System", found later in this document. system board tray 1-10 Dell PowerEdge Systems - Microprocessor Upgrade tray - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 14
a. Disconnecting power and peripheral cables. b. Removing the covers. c. Removing the front bezel. d. Removing the cooling fan shroud. See your system Installation and Troubleshooting Guide for specific instructions, if needed. support.dell.com Dell PowerEdge Systems - Microprocessor Upgrade 1-11 - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 15
cartridge 2 (SECC2) package is different. 3. Grasp the microprocessor assembly firmly and pull it away from the microprocessor guide bracket assembly. You must use up to 15 pounds (lb) of force to disengage the microprocessor from the connector. 1-12 Dell PowerEdge Systems - Microprocessor Upgrade - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 16
over the four threaded posts (see Figure 1-6). You can install the guide bracket only one way (the captive nuts will not align with the threaded posts if installed incorrectly). 2. Tighten the four captive nuts using a #2 Phillips screwdriver. Dell PowerEdge Systems - Microprocessor Upgrade 1-13 - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 17
guide bracket assembly threaded posts (4) guide bracket assembly captive nuts (4) system board connector captive nuts (4) threaded posts (4) system board connector 1-14 Dell PowerEdge Systems - Microprocessor Upgrade - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 18
remove the two retention pins (see Figure 1-7). 4. Remove the shroud by lifting the end of the shroud closest to the microproces- sor(s) until the opposite end of the shroud disengages from the cooling fan on the system back panel. support.dell.com Dell PowerEdge Systems - Microprocessor Upgrade - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 19
the large opening on the end of the cooling shroud over the top of the cooling fan on the system back panel. 2. Lower the other end of the shroud into place over the microprocessor(s). 3. Secure the shroud by reinstalling the two retention pins. 1-16 Dell PowerEdge Systems - Microprocessor Upgrade - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 20
shown in Figure 1-8. 3. Repeat steps 1 and 2 for your second upgrade microprocessor or to install a terminator card. install this retention pin after the cooling shroud is installed on PowerEdge 2300 systems only threaded stud support.dell.com Dell PowerEdge Systems - Microprocessor Upgrade 1-17 - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 21
kit and your system is a PowerEdge 1300 or PowerEdge 2300, you must install the cooling shroud provided in the upgrade kit. To install a cooling shroud, perform the following steps: 1. Carefully position the shroud into place with the square opening over the bulk- head fan and the top of the shroud - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 22
the new microprocessor is operating correctly. See your User's Guide and your Installation and Troubleshooting Guide for additional information on running the Dell Diagnostics and troubleshooting any problems that may occur. support.dell.com Dell PowerEdge Systems - Microprocessor Upgrade 1-19 - Dell PowerEdge 1300 | Dell PowerEdge Systems Microprocessor Upgrade Guide - Page 23
1-20 Dell PowerEdge Systems - Microprocessor Upgrade
±±±²³´µµ²¶·¸
¹º»»·¼½²³´µµ²¶·¸
±²³³´µ¶·¸²¹º»¼²´µ½¾¿À²Á¿
±²³´µ¶´µ³·¸¸µ´ ¹¶º´»¼· º¹²¼·