Dell PowerEdge 1655MC Replacing the Server Module Board - Page 9

4 Select the Mirroring Properties Menu and press to view or modify the mirroring mode. The two installed SCSI drives are listed with their SCSI IDs: SCSI ID 0 1 Device Fujitsu Fujitsu Identifier MAN3184MP 5507 MAN3184MP 5A01 Mirrored Pair Primary Secondary Status NOTE: SCSI ID 0 may be secondary and SCSI ID 1 may be primary in some cases. 5 Write down which SCSI ID is primary and which one is secondary. 6 Select the primary drive and press the space bar to change the Status field to No. Repeat this step for the secondary drive. NOTE: Both the primary and secondary Status fields should be No. 7 Press to exit the Mirroring Properties Menu. 8 Select Save changes and exit this menu and then press . 9 Press to exit the Adapter Properties Menu. 10 Press to exit the Main Menu. 11 Select Exit the Configuration Utility and press . The server module reboots. During POST, the two SCSI drives are displayed as nonmirrored, as shown in the following example: HBA ID LUN VENDOR PRODUCT 0 00 Fujitsu MAN3184MP 0 10 Fujitsu MAN3184MP 0 70 LSI Logic 1020/1030 12 Go to "Replacing the Server Module Board." REV 5507 5A01 1000c00 SYNC 160.0 160.0 320.0 WIDE 16 16 16 CAPACITY 18211 MB 18211 MB Replacing the Ser ver Module Board 1-5