Dell PowerEdge C5230 Using the Baseboard Management Controller - Page 34
Use DHCP to Obtain an IP, Use DHCP
View all Dell PowerEdge C5230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Table 1-16. Network Settings Item VLAN Priority Save Reset Description The priority for VLAN configuration. • Value ranges from 1 to 7. • 7 is the highest priority for VLAN. To save the entries. To Reset the modified changes. Procedure: 1 Select the LAN Interface from the drop down list. 2 Check Enable to enable the LAN Settings. 3 In IPv4 Configuration, enable Use DHCP to Obtain an IP address automatically to dynamically configure IPv4 address using DHCP. 4 If the field is disabled, enter the IPv4 Address, Subnet Mask and Default Gateway in the respective fields. 5 In IPv6 Configuration, if you wish to enable the IPv6 settings, check Enable. 6 If the IPv6 setting is enabled, enable or disable the option Use DHCP for obtaining the IP address automatically. 7 If the field is disabled, enter the IPv6 Address, Subnet Prefix length and Default Gateway in the given field. 8 In VLAN Configuration, if you wish to enable the VLAN settings, check Enable. 9 Enter the VLAN ID in the specified field. 10 Enter the VLAN Priority in the specified field. 11 Click Save to save the entries. 12 Click Reset if you want to reset the modified changes. 32