Dell PowerEdge C5230 Using the Baseboard Management Controller - Page 41
Network Privilege, SNMP Status, SNMP Access, Authentication Protocol, Privacy, protocol
View all Dell PowerEdge C5230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
5 In the Network Privilege field, enter the network privilege assigned to the user which could be Administrator, Operator, User or No Access. Please refer to table below for detailed information. Table 1-20. User Privilege Association between IPMI and Web GUI Web GUI Privilege List login BMC from Web GUI, SSH and Telnet configure BMC from Web GUI configure users from Web GUI clear logs from Web GUI execute server power control from Web GUI virtual KVM redirection virtual media Privilege association between IPMI and Web GUI Administrator Operator User O O X O O X O X X O X X O O X O O X O O X 6 Check the SNMP Status check box to enable SNMP access for the user. NOTE: Password field is mandatory, if SNMP Status is enabled. 7 Choose the SNMP Access level option for user from the SNMP Access dropdown list. Either it can be Read Only or Read Write. 8 Choose the Authentication Protocol to use for SNMP settings from the drop down list. NOTE: Password field is mandatory, if Authentication protocol is changed. 9 Choose the Encryption algorithm to use for SNMP settings from the Privacy protocol dropdown list. 39