Dell PowerEdge M820 Dell PowerEdge M820 Systems Owner's Manual - Page 34
Removing The Hard-Drive/SSD Backplane
View all Dell PowerEdge M820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Removing The Hard-Drive/SSD Backplane CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Remove the blade from the enclosure. 2. Open the blade. CAUTION: You must note the number of each hard drive/SSD and temporarily label them before removal so that you can replace them in the same locations. CAUTION: To prevent damage to the hard drives/SSDs and backplane, you must remove the hard drives/SSDs from the blade before removing the hard-drive/SSD backplane. 3. Remove the hard drive(s)/SSD(s). 4. Hold both edges of the backplane near the blade chassis and lift the backplane away from the blade. Figure 9. Removing and Installing the Hard-Drive/SSD Backplane (Full-Length) 34