Dell PowerEdge M820 Dell PowerEdge M820 Systems Owner's Manual - Page 64
Installing The Storage Controller Card/PCIe Extender Card
View all Dell PowerEdge M820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Figure 25. Removing and Installing a PCIe Extender Card 1. PCIe extender card 2. screws (2) 3. connector 4. tab 5. support bracket 6. notch Installing The Storage Controller Card/PCIe Extender Card 1. Holding by its edges, position the storage controller card/PCIe extender card so that the card-connector aligns with the system board connector. 2. Adjust the other end of the card so that the card edge is secured to the bracket. When correctly seated: - the storage controller card is secured under the tabs on the support bracket. - the notch on the PCIe extender card is securely aligned with the corresponding tab on the support bracket. 3. Insert the card connector firmly into the system board connector until the card is fully seated. 4. Install the two screws to secure the storage controller card/PCIe extender card to the system board. 5. Reinstall the system board. 6. Install the blade in the enclosure. 64