Dell PowerEdge R900 Hardware Owner's Manual (PDF) - Page 63
Installing a Drive Blank,
View all Dell PowerEdge R900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
1 Press the drive blank release in the direction of the arrow. 2 Pry the ends of the blank outward until the blank is free. For 2.5-inch hard drive configurations, remove the blank as you would the 2.5-inch hard drive carrier: 1 Open the drive blank release handle to release the blank. See Figure 3-3. 2 Slide the drive blank out until it is free of the drive bay. Figure 3-3. Removing a Drive Blank 1 1 Release handle Installing a Drive Blank The process for installing a drive blank depends on whether your system is configured with 3.5-inch or 2.5-inch hard drives. Installing System Components 63
Installing System Components
63
1
Press the drive blank release in the direction of the arrow.
2
Pry the ends of the blank outward until the blank is free.
For 2.5-inch hard drive configurations, remove the blank as you would the
2.5-inch hard drive carrier:
1
Open the drive blank release handle to release the blank. See Figure 3-3.
2
Slide the drive blank out until it is free of the drive bay.
Figure 3-3.
Removing a Drive Blank
Installing a Drive Blank
The process for installing a drive blank depends on whether your system is
configured with 3.5-inch or 2.5-inch hard drives.
1
Release handle
1