Dell PowerEdge R900 Hardware Owner's Manual (PDF) - Page 67
Installing a SATA Hard Drive Into a SATAu Hard Drive Carrier, SATAu
View all Dell PowerEdge R900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Figure 3-5. Installing a SAS Hard Drive Into a SATAu Drive Carrier 1 2 3 SATAu SAS 1 Screw (4) 3 Hard drive 2 Drive carrier Installing a SATA Hard Drive Into a SATAu Hard Drive Carrier NOTE: The SATAu drive carrier is labeled "SATAu" and also has marks indicating the SAS and SATA mounting screws. 1 Insert the SATA hard drive into the SATAu hard drive carrier with the connector end of the drive at the back. See Figure 3-5. 2 Viewing the assembly as shown in Figure 3-5, align the bottom back screw hole on the hard drive with the hole labeled "SATAu" on the hard drive carrier. 3 Attach the four screws to secure the hard drive to the hard drive carrier. See Figure 3-5. Installing System Components 67
Installing System Components
67
Figure 3-5.
Installing a SAS Hard Drive Into a SATAu Drive Carrier
Installing a SATA Hard Drive Into a SATAu Hard Drive Carrier
NOTE:
The SATAu drive carrier is labeled "SATAu" and also has marks indicating
the SAS and SATA mounting screws.
1
Insert the SATA hard drive into the SATAu hard drive carrier with the
connector end of the drive at the back. See Figure 3-5.
2
Viewing the assembly as shown in Figure 3-5, align the bottom back screw
hole on the hard drive with the hole labeled "SATAu" on the hard drive
carrier.
3
Attach the four screws to secure the hard drive to the hard drive carrier. See
Figure 3-5.
1
Screw (4)
2
Drive carrier
3
Hard drive
SATAu
SAS
1
2
3