Dell PowerSwitch S4820T Installing the S4820T System - Page 48
IEEE Standards, −40.5V/980W −48V/940W −60V/960W with fans
View all Dell PowerSwitch S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Parameter Reliability Specifications MTBF 355,178 hours NOTE: The table below represents the DC PSU's capabilities and does not represent S4820T operation. The power supply operates within all specified limits over the following input voltage range. Table 9. DC Input Specification Parameter Min/max input voltage range Maximum power consumption Typical power consumption Specifications −40.5V /−48V/ −60V 800 Watts 338 Watts Input power at full load −40.5V/970W −48V/930W −60V/950W (without fans) −40.5V/980W −48V/940W −60V/960W (with fans) Input current at full load −40.5V/23.8A −48V/19.0A −60V/15.6A (without fans) −40.5V/24A −48V/19.2A −60V/16.0A (with fans) Start up VDC Start off VDC 37.5 39.0 +/− 1.5V 37.5 +/− 1.5V IEEE Standards The S4820T switch complies with the following IEEE standards: • 802.1AB LLDP • 802.1ag Connectivity fault Management • 802.1D Bridging, STP • 802.1p L2 Prioritization • 802.1Q VLAN Tagging, Double VLAN Tagging, GVRP • 802.1s MSTP • 802.1w RSTP • 802.3ab Gigabit Ethernet (1000BASE-T) • 802.3ac Frame Extensions for VLAN Tagging • 802.3ad Link Aggregation with LACP • 802.3ae 10 Gigabit Ethernet (10GBASE-X) • 802.3ba 40 Gigabit Ethernet (40GBase-SR4, 40GBase-CR4) on optical ports • 802.3u Fast Ethernet (100BASE-TX) • 802.3x Flow Control • 802.3z Gigabit Ethernet (1000BASE-X) • ANSI/TIA-1057 (LLDP-MED) 48 Technical Specifications