Dell PowerVault NX3500 Administrator's Guide - Page 41
Creating a Host Group, Customize Advanced Virtual Disk Parameters, Finish, Mappings, Topology
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
9 In the Customize Advanced Virtual Disk Parameters window, select the appropriate Virtual Disk I/O characteristics type. 10 Select one of the following options: • File system (typical) • Database • Multimedia • Custom NOTE: If you select Custom, you must select an appropriate segment size and preferred RAID controller module ownership. For more information, see the MD storage array documentation at support.dell.com/manuals. 11 Click Finish. The virtual disks are created. Creating a Host Group To create a host group: 1 Launch the PowerVault MDSM and target the MD storage array you plan to use for your NAS storage. 2 Click the Mappings tab. 3 In the Topology pane, select the storage array or the Default Group. 4 Perform one of the following actions: • Select Mappings and then Define Host Group. • Right-click the storage array or the Default Group, and select Define Host Group from the pop-up menu. 5 Type the name of the new host group in Enter new host group name (for example, NX3500). NOTE: Host group name must use alphanumeric characters. NOTE: Since the controllers are not configured yet, no hosts will be available at this time. No host other than the NX3500 controllers should be added to this host group. 6 Click OK. The host group is added to the storage array. Setting Up Your PowerVault NX3500 Solution 41