Dell S3048-ON Networking S3048–ON Getting Started Guide - Page 13
Attaching the Ground Cable (Optional
View all Dell S3048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Figure 6. Installing the S3048 in a Front-Rack Configuration Attaching the Ground Cable (Optional) The S3048-ON requires one M4x0.7 screw for attaching a ground cable to the chassis. To properly ground the chassis, Dell Networking recommends a 6 AWG one-hole lug, #10 hole size, 63" spacing. The one-hole lug must be a UL-recognized, crimptype lug. NOTE: The rack installation ears are not a suitable grounding point. CAUTION: Grounding conductors must be made of copper. Do not use aluminum conductors. Install the Hardware 13
Figure 6. Installing the S3048 in a Front-Rack Configuration
Attaching the Ground Cable (Optional)
The S3048–ON requires one M4x0.7 screw for attaching a ground cable to the
chassis.
To properly ground the chassis, Dell Networking recommends a 6 AWG one-hole
lug, #10 hole size, 63" spacing. The one-hole lug must be a UL-recognized, crimp-
type lug.
NOTE:
The rack installation ears are not a suitable grounding point.
CAUTION:
Grounding conductors must be made of copper. Do not use
aluminum conductors.
Install the Hardware
13