Dell S3048-ON Networking S3048–ON Getting Started Guide - Page 23

Accessing the RJ-45 Console Port with a DB-9 Adapter You can connect to the console using an RJ-45 to RJ-45 rollover cable and an RJ-45 to DB-9 female DTE adapter to a terminal server (for example, a PC). The pin assignments between the console and a DTE terminal server are as follows: Table 2. Pin Assignments Between the Console and a DTE Terminal Server S3048-ON Console Port Signal RJ-45 to RJ-45 to RJ-45 to DB-9 Terminal RJ-45 RJ-45 Adapter Server Device Rollover Cable Rollover Cable RJ-45 Pinout RJ-45 Pinout DB-9 Pin Signal NC 1 8 8 CTS NC 2 7 6 DSR TxD 3 6 2 RxD GND 4 5 5 GND GND 5 4 5 GND RxD 6 3 3 TxD NC 7 2 4 DTR NC 8 1 7 RTS Default Configuration When you install the Dell Networking OS onto your S3048-ON system, it is not configured when you power up for the first time (except for the default host name, which is Dell). You must configure the system using the CLI. Dell Networking OS 23