Dell S5148F-ON Open Networking Hardware Diagnostic Guide September 2017 - Page 70
Outputlist outputlistdevicenames outputread outputwrite outputtest output
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
-L, --listdevicenames -r, --read -w, --write -I, --iteration= -n, --devname= -D, --dev= -R, --reg= -V, --val= -d, --dump List Device name Read operation Write operation Iteration command execution Device name Device (should be assigned 0 for lpc access) Register Value to be set Dump the values in the registers of a device Output list output root@dell-diag-os:~# pltool --list CPLD1 0 cpld lpc 0 (U5) 0x100 CPLD_VERSION bits:8 RO val:0 mask:0xff test:0 ver:0x0 7:4 MAJOR_VER RO 0 3:0 MINOR_VER RO 0 0x101 BOARD_TYPE bits:8 RO val:0xff mask:0xff test:0 ver:0x0 7:0 BOARD_TYPE RO 0x1 3 Board 0x102 SW_SCRATCH bits:8 RW val:0xde mask:0xff test:1 ver:0x0 7:0 SW_SCRATCH RW 0xde 0x103 CPLD_ID bits:8 RO val:0xff mask:0xff test:0 ver:0x0 7:0 CPLD_ID RO 0x1 0x10f BOARD_REV bits:8 RO val:0xff mask:0xff test:0 ver:0x0 7:0 BOARD_REV RO 0 0x110 CPLD_SEP_RST0 bits:8 RO val:0xff mask:0xff test:0 ver:0x0 7 Reset Extender CPLD 4 RW 0x1 0 Reset 1 Not Reset 6 Reset Extender CPLD 3 RW 0x1 0 Reset 1 Not Reset 5 Reset Extender CPLD 2 RW 0x1 0 Reset 1 Not Reset 4 PCA9548_RST7 RW 0x1 0 Reset 1 Not Reset 3 PCA9548_RST6 RW 0x1 0 Reset 1 Not Reset 2 PCA9548_RST5 RW 0x1 0 Reset 1 Not Reset 1 PCA9548_RST4 RW 0x1 0 Reset 1 Not Reset listdevicenames output Based from the output of --devicenames, you can decide if you need to use the --devname= option in the read or write functions. You can access CPLD1 being at deviceaddress 0, using the register value for the register you want, such as: root@dell-diag-os:~# pltool -listdevicenames 0x0 : CPLD1 0x3e : CPLD2 0x3e : CPLD3 70 Dell EMC DiagOS tools
![](/manual_guide/products/dell-s5148fon-open-networking-hardware-diagnostic-guide-2017-165103a/70.png)