Dell S5148F-ON Open Networking Hardware Diagnostic Guide September 2017 - Page 88

Configuration file format, vmetool, CLI options

Get Dell S5148F-ON PDF manuals and user guides View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

Temperature Sensor 8 temperature value is 31.0 C Temperature Sensor 9 temperature value is 42.0 C root@dell-diag-os:/opt/dell/diag/bin# Configuration file format This output example is for systems without a SMF chip. TEMPLATE:Name of sensor|sensor type|dev bus path|dev adrs|diode|mux|low|warn|critical|COMMENTS LM75 sensor |LM75|/dev/i2c-1|0x4d|0|/dev/i2c-1 0x70:0x00:0xff:0x1|-5|45|50|

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Temperature Sensor 8 temperature value is 31.0 C
Temperature Sensor 9 temperature value is 42.0 C
root@dell-diag-os:/opt/dell/diag/bin#
Configuration
file
format
This output example is for systems without a SMF chip.
TEMPLATE:Name of sensor|sensor type|dev bus path|dev adrs|diode|mux|low|warn|critical|COMMENTS
LM75 sensor |LM75|/dev/i2c-1|0x4d|0|/dev/i2c-1 0x70:0x00:0xff:0x1|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x49|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x4a|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x4b|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x4c|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x4e|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x4f|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
The temperature sensor
configuration
file
displays each sensor on its own line.
•
Sensor Name
— The name that describes the purpose of the sensor.
•
Sensor Driver Type
— The type of chip used for the sensor. LM75, MAX6699, and EMC1428 are supported.
TEMPLATE:Name of sensor|sensor type|dev bus path|dev adrs|diode|mux|low|warn|crii
tical|COMMENTS
=====
#TEMPLATE:Name of sensor|sensortype|access_type|temp_reg_offset|temp_unit|sensorr
_status_offset
LPC-INTERFACE
Temperature Sensor 1
|LM75|lpc|0x14|0.1|0xdc
Temperature Sensor 2
|LM75|lpc|0x16|0.1|0xdd
Temperature Sensor 3
|LM75|lpc|0x18|0.1|0xde
Temperature Sensor 4
|LM75|lpc|0x1a|0.1|0xdf
Temperature Sensor 5
|LM75|lpc|0x1c|0.1|0xe0
Temperature Sensor 6
|LM75|lpc|0x1e|0.1|0xe1
Temperature Sensor 7
|LM75|lpc|0x20|0.1|0xe2
Temperature Sensor 8
|LM75|lpc|0x22|0.1|0xe3
Temperature Sensor 9
|LM75|lpc|0x24|0.1|0xe4
=====
/dev/i2c-1 0x70:0:0xff:0x9:,:0x74:1:0xff:0xa
1500000
vmetool
The
CPLDupgradetool
uses
vmetool
to upgrade CPLD.
NOTE:
Do not call the
vmetool
directly; use the
cpldupgradetool
to call the
vmetool
.
CLI options
root@dell-diag-os:/opt/dell/diag/bin# vmetool
Lattice Semiconductor Corp.
ispVME(tm) V12.2 Copyright 1998-2011.
For daisy chain programming of all in-system programmable devices
Usage: vme [option] vme_file [vme_file]
Example: vme vme_file1.vme vme_file2.vme
Example: vme -c | -cl | -ch
Example: where sel_pin will be LOW for -cl option and HIGH for -ch
Example: vme -c | -cl | -ch vme_file1.vme vme_file2.vme
root@dell-diag-os:/opt/dell/diag/bin#
88
Dell EMC DiagOS tools