Dell S5148F-ON Open Networking Hardware Diagnostic Guide September 2017 - Page 78
Upgrading SMF FPGA, Copy all the binaries needed for upgrade into a local directory.
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Figure 9. Upgrade region A 5 Ensure that MSS has upgraded successfully by using the smarttool -gmv /dev/ttyS0 command after the system reboots. Figure 10. Check MSS upgrade Upgrading SMF FPGA To upgrade your system using the FPGA method, follow these steps. 1 Copy all the binaries needed for upgrade into a local directory. 78 Dell EMC DiagOS tools
![](/manual_guide/products/dell-s5148fon-open-networking-hardware-diagnostic-guide-2017-165103a/78.png)
Figure 9. Upgrade region A
5
Ensure that MSS has upgraded successfully by using the
smarttool –gmv /dev/ttyS0
command after the system reboots.
Figure 10. Check MSS upgrade
Upgrading SMF FPGA
To upgrade your system using the FPGA method, follow these steps.
1
Copy all the binaries needed for upgrade into a local directory.
78
Dell EMC DiagOS tools