Dell S5232F-ON EMC Networking OS10 Enterprise Edition Deployment Guide with Ci - Page 11
Validated environment, Validated Dell EMC ToR and ACI environment
![]() |
View all Dell S5232F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4.1 Validated environment In this example, two S5248F-ON switches are joined to an existing Cisco ACI environment. The rack contains two S5248F-ON and four PowerEdge R730xd servers. The connections between the ACI environment and the S5248F-ON switches consist of double-sided multichassis link aggregation group (MLAG). The double-sided MLAG connection consists of a vPC on the Cisco ACI side and a VLT port channel on the S5248F-ON side. All of the devices in the validated environment that are covered in this chapter, are connected as shown in Figure 6. Validated Dell EMC ToR and ACI environment Note: No physical peer link is used between the Cisco ACI leaf switches. See the Cisco ACI documentation for more information. Cisco recommends a minimum of three Application Policy Infrastructure Controllers (APICs) in a production environment. For this validation effort, a single APIC, named APIC-1, is used. All Dell EMC PowerEdge R730xd rack servers in this example are running VMware ESXi 6.7.0. VMs named "web," "app," and "db" on the ESXi hosts are running Ubuntu Linux guest operating systems. 11 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
![](/manual_guide/products/dell-powerswitch-s3048on-emc-networking-os10-enterprise-edition-deployment-guide-cisco-aci-caea9b6/11.png)