Dell S5232F-ON EMC Networking OS10 Enterprise Edition Deployment Guide with Ci - Page 25

9.1.5 show spanning-tree brief command The show spanning-tree brief command validates that STP is enabled on the leaf switches. All interfaces are forwarding (FWD), as shown in the Sts column. S5248F-1# show spanning-tree brief Spanning tree enabled protocol rstp with force-version rstp Executing IEEE compatible Spanning Tree Protocol Root ID Priority 4096, Address 54bf.64be.f540 Root Bridge hello time 2, max age 20, forward delay 15 Bridge ID Priority 4096, Address 54bf.64be.f540 We are the root Configured hello time 2, max age 20, forward delay 15 Flush Interval 200 centi-sec, Flush Invocations 62 Flush Indication threshold 65535 Interface Designated Name PortID Prio Cost Sts Cost Bridge ID PortID ethernet1/1/3 128.524 128 800 FWD 0 4096 54bf.64be.f540 128.524 ethernet1/1/4 128.528 128 800 FWD 0 4096 54bf.64be.f540 128.528 port-channel100 128.2616 128 50 FWD 0 4096 54bf.64be.f540 128.2616 Interface Name Role PortID Prio Cost Sts Cost Link-type Edge ethernet1/1/3 Desg 128.524 128 800 FWD 0 AUTO Yes ethernet1/1/4 Desg 128.528 128 800 FWD 0 AUTO Yes port-channel100 Desg 128.2616 128 50 FWD 0 AUTO No 9.1.6 show uplink state group command The show uplink-state-group command provides information about the status of the uplink state group. A status of Enabled,up shows that Uplink Failure Detection (UFD) is operational. S5248F-1# show uplink-state-group 1 Uplink State Group: 1, Status: Enabled,up 25 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI