Dell S5232F-ON EMC Networking OS10 Enterprise Edition Deployment Guide with Ci - Page 29

Verify ACI is learning endpoints, Tenants &gt, > Application Profiles &gt, Operational

Page 29 highlights

4. Verify the interface includes all required VLANs and EPGs. Repeat for remaining interfaces as needed. Repeat steps 1 through 4 for the remaining leaf switch. 9.2.3 Verify ACI is learning endpoints To verify that ACI is learning endpoints, do the following: 1. In the APIC GUI, go to Tenants > Tenant name > Application Profiles > Application Profile name > Application EPGs > select an Application EPG. 2. Click Operational at the top of the right pane as shown in Figure 16. Cisco ACI endpoints in app EPG1 3. All learned endpoints for the selected EPG are displayed along with their VLAN, IP address, and interface. Repeat the steps in this section for the remaining Application EPGs. 29 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

29
Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
4.
Verify the interface includes all required VLANs and EPGs. Repeat for remaining interfaces as
needed.
Repeat steps 1 through 4 for the remaining leaf switch.
9.2.3
Verify ACI is learning endpoints
To verify that ACI is learning endpoints, do the following:
1.
In the APIC GUI, go to
Tenants >
Tenant name
> Application Profiles >
Application Profile name
> Application EPGs >
select an
Application EPG
.
2. Click
Operational
at the top of the right pane as shown in Figure 16.
Cisco ACI endpoints in app EPG1
3.
All learned endpoints for the selected EPG are displayed along with their VLAN, IP address, and
interface.
Repeat the steps in this section for the remaining Application EPGs.