Dell S5232F-ON EMC Networking OS10 Enterprise Edition Deployment Guide with Ci - Page 12

The existing Cisco ACI environment has two PowerEdge R730xd rack servers that are directly connected to the ACI leaf switches. These rack servers are in a VMware vSphere cluster, with a vCenter VM named mgmtvc01 on R730xd-01 as shown in Figure 6. Integrating the S5248F-ON switches into the Cisco ACI environment enables the four PowerEdge R730xd servers in the rack to join the existing VMware vSphere cluster. This enables all hosts and VMs to communicate using the relevant networks. The in-band test environment uses the five networks that are shown in Table 3. In-band networks used VLAN ID VLAN name Description 1612 vMotion VM migration 1613 vSAN Storage 1614 web VM data network 1615 app VM data network 1616 db VM data network Network address Gateway address 172.16.12.0/24 172.16.12.254 172.16.13.0/24 172.16.13.254 172.16.14.0/24 172.16.14.254 172.16.15.0/24 172.16.15.254 172.16.16.0/24 172.16.16.254 Note: While the VMware vSphere vMotion and vSAN networks are configured in this example, their use is out of scope for this guide. VMs in the validated environment use the IP addresses shown in Table 4. VM IP addresses VM name VLAN name mgmtvc01 ESXi_Mgmt web01-web03 web app01-app03 app db01-db02 db IP address 100.67.163.171 172.16.14.1-3 172.16.15.1-3 172.16.16.1-2 12 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI