Dell Studio 1569 Service Manual - Page 34

1 optical drive assembly 2 screws (5) 8. Disconnect the optical drive interposer from the optical drive. 9. Remove the four screws (two on each side) that secure the optical drive brackets to the optical drive. 1 optical drive 3 screws (4) 2 brackets (2) 4 optical drive interposer Replacing the Optical Drive 1. Follow the procedures in Before You Begin. 2. Replace the four screws (two on each side) that secure the optical drive brackets to the optical drive. 3. Connect the optical drive interposer to the optical drive. 4. Place the optical drive assembly in the computer base. 5. Replace the five screws that secure the optical drive to the computer base. 6. Replace the palm rest (see Replacing the Palm Rest). 7. Replace the keyboard (see Replacing the Keyboard). 8. Replace the power button panel (see Replacing the Power Button Panel). 9. Turn the computer over and replace the screw that secures the optical drive assembly to the computer base. 10. Replace the battery (see Replacing the Battery). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Back to Contents Page