Dell Studio 1569 Service Manual - Page 46
USB/Audio Board
View all Dell Studio 1569 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Back to Contents Page USB/Audio Board Dell™ Studio™ 1569 Service Manual Removing the USB/Audio Board Replacing the USB/Audio Board Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface. CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. Removing the USB/Audio Board 1. Follow the procedures in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Remove the power button panel (see Removing the Power Button Panel). 4. Remove the keyboard (see Removing the Keyboard). 5. Remove the palm rest (see Removing the Palm Rest). 6. Disconnect the speaker cable from the USB/audio board connector. 7. Pull the pull-tab to disconnect the USB cable from the USB/audio board connector. 8. Lift the connector latch, then pull the pull-tab and disconnect the audio cable from the USB/audio board connector. 9. Remove the three screws that secure the USB/audio board to the computer base. 10. Lift the USB/audio board out of the computer base. 1 USB cable 3 speaker cable 5 USB/audio board 7 pull-tab 2 pull-tab 4 screws (3) 6 audio cable 8 latch connector