Dell Vostro 1000 Owner's Manual - Page 100
Hinge Cover
View all Dell Vostro 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Hinge Cover CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer. 1 Follow the procedures in "Before You Begin" on page 89. 2 Remove the hinge cover.: a Open the display all the way (180 degrees) so that it lies flat against your work surface. NOTICE: To avoid damage to the hinge cover, do not lift the cover on both sides simultaneously. b Insert a scribe into the indent to lift the hinge cover on the right side. c Ease the hinge cover up, moving from right to left, and remove it. NOTE: When replacing the hinge cover, first insert the left edge and then press from left to right until the cover snaps into place. 100 Adding and Replacing Parts