Dell Vostro 1000 Owner's Manual - Page 104
degree angle, and then press the other end of the Mini-Card down
View all Dell Vostro 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
b Release the Mini-Card by pushing the metal securing tabs toward the back of the computer until the card pops up slightly. c Lift the Mini-Card out of its system board connector. 1 2 3 1 metal securing tab 2 Mini-Card 3 metal securing tab NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. 5 Install the replacement Mini-Card: a Insert the Mini-Card connector into the system board connector at a 45-degree angle, and then press the other end of the Mini-Card down into the securing tabs until the card clicks into place. 104 Adding and Replacing Parts
104
Adding and Replacing Parts
b
Release the Mini-Card by pushing the metal securing tabs toward the
back of the computer until the card pops up slightly.
c
Lift the Mini-Card out of its system board connector.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the card and on the system board, and realign
the card.
5
Install the replacement Mini-Card:
a
Insert the Mini-Card connector into the system board connector at a
45-degree angle, and then press the other end of the Mini-Card down
into the securing tabs until the card clicks into place.
1
metal securing tab
2
Mini-Card
3
metal securing tab
2
3
1