Dell Vostro 1000 Owner's Manual - Page 107
Display - battery cannot be identified
View all Dell Vostro 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
4 Insert a plastic scribe into the guide on the side of the coin-cell battery compartment, and pop the battery out. When you replace the battery, insert it at a 30-degree angle under the clip with the positive (identified by a plus [+] symbol) side up, and then push it into place. Display CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer. 1 Follow the procedures in "Before You Begin" on page 89. 2 Remove the hinge cover. See "Hinge Cover" on page 100. 3 Remove the six screws that secure the display (two on the top, two on the bottom, and two on the back). 4 Disconnect the antenna cables from the Mini-Card. Adding and Replacing Parts 107