Dell Vostro 15 5510 Service Manual - Page 14
Installing the base cover, Steps, Prerequisites, About this task
![]() |
View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Steps 1. Loosen the two (M2x7.5) captive screws that secure the base cover to the palm-rest and keyboard assembly. 2. Remove the seven (M2x4) screws that secure the base cover to the palm-rest and keyboard assembly. 3. Using a plastic scribe, pry the base cover from the U-shaped indents at the top edge of the base cover and continue to work on the sides to release the base cover from the palm-rest and keyboard assembly. 4. Lift the base cover off the palm-rest and keyboard assembly. Installing the base cover Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the base cover and provide a visual representation of the installation procedure. 14 Removing and installing components
![](/manual_guide/products/dell-vostro-15-5510-service-manual-097ffc9/14.png)