Dell Vostro 15 5510 Service Manual - Page 62
Palm-rest and keyboard assembly
![]() |
View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
13. Connect the I/O-board cable to the system board. 14. Adhere the tape that secures the I/O-board cable to the system board. 15. Close the right display hinge. 16. Replace the three (M2.5x4.5) screws that secure the right display-hinge to the palm-rest and keyboard assembly. Next steps 1. Install the heat sink. 2. Install the fan. 3. Install the wireless card. 4. Install the M.2 2280 solid-state drive or M.2 2230 solid-state drive in M.2 slot one, whichever applicable. 5. Install the M.2 2230 solid-state drive in M.2 slot two, if applicable. 6. Install the memory module. 7. Install the 3-cell battery or 4-cell battery, whichever applicable. 8. Install the base cover. 9. Follow the procedure in After working inside your computer. Palm-rest and keyboard assembly Removing the palm-rest and keyboard assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 3-cell battery or 4-cell battery, whichever applicable. 4. Remove the memory module. 5. Remove the M.2 2280 solid-state drive or M.2 2230 solid-state drive from M.2 slot one, whichever applicable. 6. Remove the M.2 2230 solid-state drive from M.2 slot two, if applicable. 7. Remove the wireless card. 8. Remove the fan. 9. Remove the coin-cell battery. 10. Remove the I/O board. 11. Remove the system board. NOTE: The system board can be removed along with the heat sink. 12. Remove the power-button with optional fingerprint reader. 13. Remove the power-adapter port. 14. Remove the speakers. 15. Remove the touchpad. 16. Remove the display assembly. About this task After performing the steps in the pre-requisites, you are left with the palm-rest and keyboard assembly. 62 Removing and installing components
![](/manual_guide/products/dell-vostro-15-5510-service-manual-097ffc9/62.png)