Dell Vostro 15 5510 Service Manual - Page 47
Touchpad, Removing the touchpad, Installing the touchpad
![]() |
View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Touchpad Removing the touchpad Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following images indicate the location of the touchpad and provide a visual representation of the removal procedure. Steps 1. Open the latch and disconnect the touchpad cable from the system board. 2. Remove the three (M1.6x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly. 3. Peel the tape that secures the touchpad bracket to the palm-rest and keyboard assembly. 4. Lift the touchpad bracket off the palm-rest and keyboard assembly. 5. Remove the two (M2x1.8) screws that secure the touchpad to the palm-rest and keyboard assembly. 6. Peel the tapes that secure the touchpad to the palm-rest and keyboard assembly. 7. Lift the touchpad, along with the touchpad cable, off the palm-rest and keyboard assembly. Installing the touchpad Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the touchpad and provides a visual representation of the installation procedure. Removing and installing components 47
![](/manual_guide/products/dell-vostro-15-5510-service-manual-097ffc9/47.png)