Dell Vostro 15 5510 Service Manual - Page 26
Removing the 2280 solid-state drive from M.2 slot one, About this task, Steps, Next steps
![]() |
View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
About this task NOTE: Solid-state drives are fragile. Exercise care when handling the solid-state drive. NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive, or a 2280 solid-state drive in M.2 slot one. NOTE: This procedure applies only if you are installing a 2230 solid-state drive in M.2 slot one. NOTE: Before installing your 2230 or 2280 solid-state drive, ensure that the mounting bracket is in the correct location. For more information, see Installing the solid-state drive mounting bracket. The following image indicates the location of the 2230 solid-state drive that is installed in M.2 slot one and provides a visual representation of the installation procedure. Steps 1. Align the notch on the 2230 solid-state drive with the tab on the solid-state drive slot. 2. Slide the 2230 solid-state drive firmly into the solid-state drive slot at an angle. 3. Align the screw hole on the solid-state drive with the screw hole on the palm-rest and keyboard assembly. 4. Replace the screw (M2x3) that secures the 2230 solid-state drive to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Removing the 2280 solid-state drive from M.2 slot one Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Solid-state drives are fragile. Exercise care when handling the solid-state drive. NOTE: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state. 26 Removing and installing components
![](/manual_guide/products/dell-vostro-15-5510-service-manual-097ffc9/26.png)