Dell Vostro 15 5510 Service Manual - Page 42
I/O board, Removing the I/O board
![]() |
View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Steps 1. Place the network-port bracket on the I/O board. 2. Align the screw holes on the network-port bracket to the screw holes on the I/O board. 3. Replace the two (M2x5) screws that secure the network-port bracket to the I/O board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. I/O board Removing the I/O board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. 4. Remove the network-port bracket. About this task The following images indicate the location of the I/O board and provide a visual representation of the removal procedure. 42 Removing and installing components
![](/manual_guide/products/dell-vostro-15-5510-service-manual-097ffc9/42.png)
Steps
1.
Place the network-port bracket on the I/O board.
2.
Align the screw holes on the network-port bracket to the screw holes on the I/O board.
3.
Replace the two (M2x5) screws that secure the network-port bracket to the I/O board.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
I/O board
Removing the I/O board
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Enter
Service Mode
.
3.
Remove the
base cover
.
4.
Remove the
network-port bracket
.
About this task
The following images indicate the location of the I/O board and provide a visual representation of the removal procedure.
42
Removing and installing components