Dell Vostro 15 5510 Service Manual - Page 27
Installing the 2280 solid-state drive in M.2 slot one, About this task, Steps, Prerequisites
![]() |
View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2. Enter Service Mode. 3. Remove the base cover. About this task NOTE: Depending on the configuration ordered, your computer may support a 2280 solid-state drive, or a 2230 solid-state drive in M.2 slot one. NOTE: This procedure applies only to computers shipped with a 2280 solid-state drive installed in M.2 slot one. The following image indicates the location of the 2280 solid-state drive that is installed in M.2 slot one and provides a visual representation of the removal procedure. Steps 1. Remove the screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly. 2. Slide and lift the 2280 solid-state drive off the M.2 solid-state drive slot one on the system board. Installing the 2280 solid-state drive in M.2 slot one Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task NOTE: Solid-state drives are fragile. Exercise care when handling the solid-state drive. NOTE: Depending on the configuration ordered, the computer one may support a 2280 solid-state drive, or a 2230 solid-state drive in M.2 slot one. NOTE: This procedure is applicable if you are installing a 2280 solid-state drive in M.2 slot one. NOTE: Before installing your 2230 or 2280 solid-state drive, ensure that the mounting bracket is in the correct location. For more information, see Installing the solid-state drive mounting bracket. Removing and installing components 27
![](/manual_guide/products/dell-vostro-15-5510-service-manual-097ffc9/27.png)